Maidstone Building Supplies by Discount Builders Merchants, Northfleet

Kerbs and channels, Kings Hill and Maidstone

A kerb holds the edge of a road, a drive or a parking court and steers the water along it. This guide explains the kerb and channel names in the yard's list, how many units a run takes, how they are bedded, and what the order for a kerbed parking court edge at Kings Hill looks like. Everything comes from the yard in Northfleet.

Maidstone Building Supplies is the Maidstone delivery site of Discount Builders Merchants (KENT) LTD, the builders' merchant at Lower Road, Northfleet, DA11 9BB. There is one yard, and orders are placed on www.discountbm.co.uk.

Aerial view of the Northfleet yard, with timber, blocks, bagged aggregates, and lorries

Reading the kerb names

The letters give the profile and the figures the size. HB2 is the half battered kerb, 125 mm wide and 255 mm high, with the upper part of its face sloped back. BN is bullnosed, with a rounded top edge: BN2 is the same 125 x 255 mm section, and BN3 is the shallow one at 125 x 150 mm. SP2 is splayed, with a sloping face that a wheel can ride up.

Straight kerbs are 914 mm long. The corner pieces are listed by profile: internal and external angles, and quadrants marked QHB and QBN. A transitional kerb, in left and right hand, changes the line from HB2 to SP2.

Dropped crossings and curves

Where vehicles cross the kerb line, the full kerb steps down to BN3 kerbs laid low. The step is made by a taper, often called a dropper, listed as HB2-BN3, BN2-BN3 or SP2-BN3. Each crossing takes one left-hand and one right-hand taper with the BN3 kerbs between them. Confirm with the yard which hand is which before ordering.

Radius kerbs are listed by the radius of the curve in metres, from 1 m to 10.5 m in HB2 and from 2 m to 10 m in BN3, and as external or internal. Take the radius from the drawing or measure it on the ground. The length of a radius unit is not in its name, so ask for it before counting a curve.

Channels

Channels are laid in the surface along the kerb line, or across a yard, to carry water to a gully. The list has square channels in two sections, CS1 at 255 x 125 mm and CS3 at 150 x 100 mm, and a dished channel at 255 x 125 mm. They are 914 mm long, like the kerbs. Gullies and their gratings are listed with the civils materials.

Counting and bedding

At 914 mm a unit, allow about 1.1 kerbs or channels for every metre and round up. Measure the straight runs separately from the crossings and curves, and add a spare or two for cuts at the ends.

Kerbs sit on a concrete bed and are haunched with more concrete up the back, which is what stops them being pushed over. The size of the bed and haunch comes from the specification. Set the kerbs to a string line for line and level, and let the haunch harden before anything is compacted against it. The type 1 guide on this site gives the ballast and cement for a cubic metre of concrete mixed on site.

Public road or private

A kerb on a public road is not the householder's to alter. A dropped kerb onto one needs the consent of the highway authority, which here is Kent County Council, and the work is usually done by a contractor it approves, so check with the council before ordering anything. On a newer estate such as Kings Hill, find out first whether the road has been adopted or is still private, because that decides whose consent is needed.

Parking courts, private drives and the service yards on the trading estates round Aylesford are the owner's to kerb, to the engineer's specification where there is one.

Getting kerbs to the job

Kerbs are heavy and awkward to carry far by hand. Say where along the run they can be set down, and give the yard the site contact and any width or weight limit on the way in. Order the tapers and corner pieces with the straights, because a run cannot be finished without them.

Rules of thumb

Working figures for planning an order. Check them against your drawings and the product you choose.
Straight kerbs and channels 914 mm long. About 1.1 per metre of run.
Dropped crossing One left-hand and one right-hand taper, with BN3 kerbs between. Four BN3 kerbs span about 3.7 m.
Curves and corners Radius kerbs by radius, internal or external. Angles and quadrants by profile. Ask for the unit length before counting a curve.
Concrete for bed and haunch The section comes from the specification. The type 1 guide on this site gives the ballast and cement per cubic metre.
Dropped kerb on a public road Needs the highway authority's consent. Check with Kent County Council.

The shop has calculators that turn a measurement into a quantity.

Worked order: Kerbing a parking court edge with one dropped crossing at Kings Hill

Priced with the shop's prices today, last checked , and the yard's delivery charge to ME19. Amounts are ex VAT unless marked.
Product Quantity What it is for Cost
BN2 125x255x914mm 18 at £9.99 16 m of full-height kerb at about 1.1 per metre is 17.6 £179.82
BN3 125x150x914mm 4 at £8.49 The low kerbs across a 3.7 m crossing to a garage £33.96
BN2-BN3 Taper Left Hand 1 at £15.99 Steps the kerb down on one side of the crossing £15.99
BN2-BN3 Taper Right Hand 1 at £15.99 Steps it back up on the other side £15.99
Bulk Bag Ballast 20mm 4 at £40.00 Bed and haunch assumed at 0.06 cubic metres per metre over about 21.5 m is 1.3 cubic metres, 2.5 tonnes of ballast, allowing about 0.8 tonnes a bag; confirm with the yard. The specification sets the real section. £160.00
25kg Mastercrete Cement (plastic) 17 at £7.99 1.3 cubic metres at thirteen bags per cubic metre £135.83
Goods £541.59
Delivery to ME19 £0.00
Delivered total ex VAT £541.59
Delivered total inc VAT £649.91

Bulk bags: the bags in this order are counted at about 0.8 tonnes each. That is a planning figure. The shop does not publish a weight for a bulk bag, so confirm the number of bags with the yard before ordering.

Not in this order: Radius kerbs or quadrants for any corners, a channel and gully if the surface drains to the kerb line, and the sub-base and surfacing behind the kerbs.

The quantities are a starting point for a job of this size. Put the same goods in a basket on www.discountbm.co.uk with your own postcode to see the figure for your order, or send the yard your list.

On the shop today

The products this guide talks about, from the shop's Concrete Kerbs & Edgings aisle. Prices last checked .

Prices are the shop's prices today. Stock and ordering are on www.discountbm.co.uk.

Civils and groundworks supplies delivered in Maidstone See all Concrete Kerbs & Edgings on the shop

Delivery to Maidstone

ME6, ME14, ME15, ME16, ME18, ME19, ME20

Free when the goods reach £41.66 ex VAT (£49.99 inc VAT).

A smaller order pays the difference up to that amount: goods of £25.00 ex VAT (£30.00 inc VAT) pay £16.66 ex VAT (£19.99 inc VAT) for delivery.

ME17

£50.00 ex VAT (£60.00 inc VAT) when the goods are under £100.00 ex VAT (£120.00 inc VAT).

Free when the goods reach £100.00 ex VAT (£120.00 inc VAT).

Delivery charges by district · Contact the yard

More guides for Maidstone